Tiling

Roff Vitrofix

Highly polymer modified, cementitious tile adhesive for vitrified tiles

  • Packaging Unit

    20kg (Grey and White)

  • Coverage

    • Approx. 3 sq ft/ kg at 3 mm thickness (using 6 mm x 6 mm notch).

    * Coverage will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness

  • Specification/ certification

    Type 2 ‘T’ as per IS;
    Conforms to class C1TE as per EN 12004:2017/ ISO 13007 – a cementitious (C) Normal Adhesive (1) slip resistant (T) Extended Open Time (E) tile adhesive

  • Recommended for

    (a)Vitrified tiles above 2ft X 2ft, marble or granite for interior application
    (b) Tile on Tile application for interior

Product Related Documents

For any other documents & support, contact us.

Features & Benefits

1

Easy to use – just add water; polymer-modified for strong adhesion on various substrates.

2

Sag-resistant, water & shock resistant; ideal for wet areas and high-temperature locations.

3

Low VOC for healthy living.

Application

STEP 1

Substrate Preparation:
The substrate must be free from debris and levelled –
a. Wall by plastering
b. Floor by appropriate screed

STEP 2

Mixing:
Take clean water in a container (as mentioned on the bag) and add powder to it slowly. Mix it with a hand drill mixer till consistent.

STEP 3

Application:
Use appropriate notch trowel to apply the adhesive on the substrate. Press the tiles firmly into position with a slight twisting action. Leave adequate joints between tiles using spacers.