Tiling

Roff Non Skid Adhesive

Polymer-modified cementitious tile adhesive for vitrified tiles

  • Packaging Unit

    20kg (Grey and White)

  • Coverage

    • Approx. 3 sq ft/ kg at 3 mm thickness (using 6 mm x 6 mm notch).

    * Coverage will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness

  • Specification/ certification

    Conforms to IS 15477: 2004 Type 2 & IS 15477 : 2019 – Type 1’T’ “Specification for Adhesives for use with Ceramic Tiles and Mosaics.”

  • Recommended for

    (a) Ceramic and Vitrified tiles upto 2ft X 2ft on walls and floors
    (b) Tile on tile application for interior

Product Related Documents

For any other documents & support, contact us.

Features & Benefits

1

Easy to use – just add water; ideal for tile-on-tile and vertical applications.

2

Strong adhesive bond; water-resistant for wet areas and various substrates.

3

Low VOC for healthy living.

Application

STEP 1

Substrate Preparation:
The substrate must be free from debris and levelled –
a. Wall by plastering
b. Floor by appropriate screed

STEP 2

Mixing:
Take clean water in a container (as mentioned on the bag) and add powder to it slowly. Mix it with a hand drill mixer till consistent.

STEP 3

Application:
Use appropriate notch trowel to apply the adhesive on the substrate. Press the tiles firmly into position with a slight twisting action. Leave adequate joints between tiles using spacers.