Tiling

Roff Extrofix

Highly polymer modified & deformable, cementitious tile adhesive for vitrified tiles

  • Packaging Unit

    20kg (Grey and White)

  • Coverage

    • Approx. 3 sq ft/ kg at 3 mm thickness (using 6 mm x 6 mm notch).

    * Coverage will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness

  • Specification/ certification

    Type 3 T S1 as per IS; Conforms to class C2TES1 as per EN 12004 : 2017/ ISO 13007 – a cementitious (C) improved Performance (2) slip resistant (T) extended open time (E) deformable (S1) adhesive.

  • Recommended for

    Any vitrified tiles, marble or granite for exterior application

Product Related Documents

For any other documents & support, contact us.

Features & Benefits

1

Ready-to-use – just add water on site.

2

Polymer-modified for strong adhesion on various substrates and tiles.

3

Long open time, sag-resistant, water & shock resistant for wet and vertical areas.

4

Flexible, heat-resistant, and low VOC for safe use in high-temperature locations.

Application

STEP 1

Substrate Preparation:
The substrate must be free from debris and levelled –
a. Wall by plastering
b. Floor by appropriate screed

STEP 2

Mixing:
Take clean water in a container (as mentioned on the bag) and add powder to it slowly. Mix it with a hand drill mixer till consistent.

STEP 3

Application:
Use appropriate notch trowel to apply the adhesive on the substrate. Press the tiles firmly into position with a slight twisting action. Leave adequate joints between tiles using spacers.